If you are looking for a way to kick the habit of smoking cigarettes, vaping is considered a healthier alternative. Cigarette smoke is well known to contain toxins and other chemicals which are bad for the health, coupled with the rising costs of cigarettes, switching to vaping could end up saving you lots of money in the long term.
On searching for a vape mod on the internet, you are going to find many brands of vape mods ranging from the cheap to the expensive. Deciding on which vape mod can be a little intimidating at the start. Luckily, we have one that we highly recommend.
A popular and stylish vaping mod available on the market is the Eleaf Aster 75w Mod. It’s a great introduction to vaping that’s not too heavy on the wallet. So let’s give this mod a review and see if it is the starter mod of choice.
Things To Consider Before Buying A Vape Mod
So you have decided to take the plunge and purchase your first vape mod. The first and most important decision is to decide what your budget is and how much you are willing to invest in a vaping device.
Some starter kits retail for as little as $60 and escalates up to a few hundred dollars. Bear in mind that no matter what your budgetary price range, there is a vaping mod that will be suitable for your needs.
Using your vape mod is simple, merely switch it on and vape away. However, the downside to this is that your vaping device can run out of battery if you vape on a regular basis.
The battery life of the vape mods available is very much dependant on the brand and model you choose to vape with. The more compact vape mods will have a shorter battery life whereas the larger, more expensive brands and models will usually have a longer battery life.
When looking at the various brands and models on display, make a comparison of the milliamp hours (usually mAh on the box) and find the vape mods with the highest mAh number. These batteries will last longer.
If you are making the switch from cigarette smoking, choosing the right nicotine levels will be important to prevent a relapse back to conventional cigarette smoking. In most cases the e-juices available for vaping come in varying levels of nicotine output.
The levels are most commonly 3, 6, 12, 18 and 24 milligrams of nicotine depending on how heavy a cigarette smoker you were. The nicotine level you should start at really depends on you. It’s a matter of seeing how your body reacts to the different nicotine levels on offer.
Often overlooked, but equally as important to consider is the portability of the vaping device you wish to use. For vaping on the go, it is wise to invest in a more portable and compact vape mod that can fit in your pocket.
If you are making the transition from cigarettes to vaping, it is highly recommended that you start with a portable vaping mod. Not only for the cost saving, but also so that you use it at home and on the go as you get acclimated to the vaping experience.
Eleaf Aster 75w TC Mod Review
So now we have taken some of the relevant points of vaping into consideration, let’s take a look at the Eleaf Aster 75w box mod itself.
In brief, the Eleaf Aster 75w box mod has a very compact and streamlined design. The mod uses one 18650 rechargeable battery and the device supplies an impressive 75W of power output. The mod sports plenty of operational modes for the user including temperature control, variable wattage control and a bypass mode.
The Eleaf Aster 75w mod also includes three TCR presets and the firmware can be easily upgradable via software using the supplied USB cable. The mod does not come with the battery included in the box.
The Eleaf Aster is a smartly constructed vaping device that is ergonomically designed to fit easily into the palm of the hand regardless if you’re right handed or left handed. The mod has a conveniently placed vapor activation button and a nice large OLED display screen for easy viewing of the various settings and features present within the mod.
This box mod delivers a very satisfying amount of vapor when set to the maximum 75Watt output range and comes with temperature control technology that supports Ni200, Titanium coils along with several stainless steel coils. The Eleaf Aster’s battery can be easily replaced due to the cases magnetic battery cover.
- Nice compact size
- Ergonomic design
- A convenient magnetic battery cover
- Lightweight with a good feel
- Excellent battery life
- 75 Watt power output
- Good button placement and feel
- The large OLED display is easily readable
- Plenty of temperature settings
- Available in various colors
- Slight button rattle
- The button material has a cheap feel to it
- Reports of the battery being difficult to remove
Features and benefits
- Ergonomic Design
- There are several colors on offer: White, Silver, Pink, Grey and Black
The Eleaf Astor 75W mods dimensions are 35.5mm x 23.0mm x 91mm respectively affording a shape and size that is both attractive and has a comfortable grip due to the modern ergonomic design.
- Requires 1x Single High-Amp 18650 Battery (Sold Separately)
- Magnetized Battery cover
The Eleaf Astor 75W TC mod is powered by a single 18650 battery which is unfortunately sold separately. A great feature of the mod is the ability to change batteries once they are flat. This allows you to carry spare fully charged batteries with you for a simple swap out if necessary. The magnetized battery cover makes this a breeze.
- Wattage Output Range: 1-75W
As the Eleaf Aster 75W mod is capable of variable wattage output, it is capable of pushing out as low as 1 watt to as high as 75 watts of power. The simple + or – button design means you can fine-tune how much power you need at the press of a button.
- Temperature range: 100－315℃/200－600℉ (TC modes) Stainless Steel Spring-Loaded 510 Connector
- Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
The Eleaf Aster 75W mod comes with inbuilt temperature control and limiting functions as standard. Together with an atomizer coil made with either Titanium, Nickel or stainless steel the mod allows you to adjust the temperature of the mods coil. This handy feature allows you to control the heat of the vapor that the mod produces.
- Smart Mode Setting – Automated Atomizer Detection
The smart mode enables you to set up specific wattages for up to 10 different options. If you often change e-juice tanks, the smart mode will save you lots of time adjusting the wattages each time you change tanks, the software will automatically apply the wattage you previously specify when the tank is changed.
- Dual Circuit Protection
The Eleaf Aster 75W TC mod includes a circuit protection system that has software and hardware-based battery protection that protects against the overcharging, over-discharging, and current of the battery
- Reverse Polarity Protection
Another handy feature of the Eleaf Aster is the reverse polarity protection circuit on the circuit board in case of accidentally inserting the battery upside down
- Intuitive OLED Display
A prominent feature of the Eleaf Aster 75W TC mod is the hi-res OLED screen on the main face of the mod. There is a whole host of information at your fingertips. On activation you can see the resistance on the coil of the atomizer, how much battery is left, what wattage setting the mod is at, temperature and will display any critical errors that pop up during use.
- Micro USB Port
There are two options for charging the Eleaf Aster 75W TC mod, one is via the side-mounted USB port connected to a PC or an external battery charger. It is highly recommended that an external battery charger is used to greatly decrease the time it takes the battery to get to full charge.
The micro USB port is also used to upgrade the ELeaf Asters internal firmware via software which you can download from the Eleaf site. Ensuring that your Eleaf Aster mod is always updated with any important tweaks or changes to its functionality.
- Temperature Coefficient of Resistance (TCR) Adjustments
- Wattage Lock Functionality
- Resistance Lock Functionality
What’s In The Box
- 1 Eleaf Aster 75W TC Mod (battery not included)
- 1 Micro USB Cable
- Eleaf Aster user manual
Short Video On Eleaf Aster 75W
Eleaf has a YouTube channel where you can check out the various products they have on offer including some handy tutorial vids. Here is a link to the Eleaf Aster Tutorial that explains some of the key features of the product;
What Are People Saying About The Eleaf Aster?
On surfing the internet you will find no shortage of reviews and feedback on this product. Most people that had bought it or tried it were extremely positive and there was very little negative feedback.
Here are a couple of screenshots of reviews by verified users of the Eleaf Aster vaping mod
Other Vape Mods To Consider
Eleaf Aster not for you? Check these out.
SMOK X-Priv Baby
The SMOK X-Priv differs from the Eleaf Aster mod in design, where the Eleaf is cylindrical, the X-Priv is box-shaped. The X-Priv Baby is considered the smaller portable version of the full sized H-Priv and is ideal as a starter kit for those wishing to transition from cigarettes to vaping. it has a large 2-inch color display which is easy to read in any light.
The X-Priv baby has a power output of 80 watts and can accommodate titanium, nickel and stainless steel in temperature control mode. Unlike the Eleaf Asters top mounted fire button the x-Priv sports a large side mounted fire button. The unit can also be charged via the bottom mounted micro USB port.
Features and Specs
- Dimensions: 2-5/8″ x 1-11/16″ x 1-1/16
- Wattage Range: 1.0 – 80.0W
- Output Voltage: 0.5 – 9.0V
- Variable Temperature Control : Nickel 200 / Titanium / Stainless Steel / TCR
- Temperature Control
- Built-in 2300mAh Battery
- Large Tactile Side Fire Button
- Bottom Micro USB Charging Port
Joyetech Exceed Edge
Whereas the SMOK X-Priv differs from the Eleaf in design by being a box shape, the Joye Exceed Edge utilizes the pen shape design and is an all in one starter kit for both those wishing to transition from cigarettes to vaping as well as established vape mod users. The Exceed uses a one-button design and has an output power rating of 25 watts. The Joye Exceed Edge can be charged with the inbuilt micro USB port.
Features and Specs:
- Dimensions: 4-5/16″ x 1-1/16″ x 3/4″
- Simple One Button Design
- Maximum Output Wattage: 25W
- Built-in Battery Capacity: 650mAh
- Side Fill Design with Stopper
- Battery Life Indicator Light
- Micro USB Charging Port
SMOK Rolo Badge
What immediately sets this apart from the Eleaf Aster is the shape. The SMOK Rolo Badge is exactly that, in the shape of a badge. This mod is an all in one pod design that is easily stashed in the pocket for vaping on the go. A simple starter kit ideal for those looking to stop smoking and are keen for a cost-effective entry point into vaping. The Rolo Badge does not feature any button for firing up and is activated once you start to inhale. Lightweight and highly compact the Rolo badge can be charged via the inbuilt micro USB port.
Features and Specs:
- Dimensions: 2-7/8″ x 1-15/16″ x 3/16″
- Classic Automatic Style
- Refillable Pod/Cartridge System
- All-in-One Device
- Output Wattage: 10 – 16W
- Built-in Battery Capacity: 250mAh
- Lightweight and Compact Design
- Micro USB Charging Port
Final Thoughts On Eleaf Aster
Without a doubt, the Eleaf Aster 75W TC mod is an excellent everyday vaping mod for beginners and enthusiasts.
If you are making the change from cigarettes to vaping and you are looking for a cost-effective yet feature-packed vaping mod, the Eleaf Aster is definitely one of the mods that you should seriously consider.
Small, lightweight, well-engineered and constructed with an attractive design aesthetic, the Eleaf Aster is a versatile device.
Take the time to look up the Eleaf Aster 75W TC mod on the internet and you will find that the device has had overwhelmingly positive feedback from the vaping community.